Horyong SKY 3004N auto hydrostack on Hyundai car chassis
The lift allows you to work at a height of up to 30 meters, which is the best indicator in the market of hydraulic lifts. It combines the latest design developments and innovative technologies with no analogues in the world.
Thanks to safety systems, the lift provides a high level of operator safety and ease of operation. The unique design of the lift allows you to perform a wide range of work of high complexity at different heights.
Warranty: 12 months or 1 thousand hours, whichever comes first.
The equipment comes fully ready for use without restriction. Additionally, we offer free staff training for up to 3 people.
Description of components
1. Telescopic boom. Consists of 5 sections. High lifting capacity of the boom boom is achieved thanks to a special 5-angle boom section profile. The material of manufacture is special 8-angle steel from a strong profile.
2. Working platform. The work platform consists of a secure frame, front doors and mounts for the operator’s safety belts. The dimensions of the platform allow workers to move the entire length. The system of balancing and keeping the platform in a horizontal position is below the platform. The dimensions of the platform allow you to perform a large amount of work without changing the position of the platform. The platform can rotate 360 degrees around the axis. In the derived position, the platform is folded. The material of the manufactured platform is steel.
3. Rotary platform. The work boom is attached to the turning circle on the work platform. The turning circle has a toothed profile. Boom rotation with hydraulic motor and planetary gear. The drive of the hydraulic system of the car tower – from the power takeoff box on the gearbox of the car. Turn on the power take-off box from the driver’s workplace.
4. Outriggers. The design of the outriggers includes horizontal cylinders of expansion, and jacks for suspension of an autotower. The geometry of the supports allows you to provide a working radius of the lift – 360 degrees. To increase the stability of the chassis, the design provides four additional outriggers, which are installed together with the main ones.
5. The hydraulic system consists of a hydraulic pump, a tank of hydraulic fluid, hydraulic valves, a hydraulic motor, and hydraulic cylinders. The total volume of the tank of the hydraulic system is 550l, the working pressure in the hydraulic system is 230 bar.
6. Remote control with position and load indication is included in the hydraulic lift kit. All dashboards in Ukrainian or Russian.
- Emergency valve of hydraulic outrigger system. Controls the lowering of the boom to its original position. The hydraulic outrigger system remains switched off until the boom is folded down and mounted.
- The limiter. Does not allow the hydraulic lift to operate when the work platform is overloaded.
- Load torque indicator. Mounted at the highest point of the loading platform. This unit allows you to check the load torque during the platform operation to prevent the boom from bending or tipping over. The principle of action is to constantly monitor the center of gravity of the boom. The computer is built to calculate the value of the load torque depending on the loading of the work platform, the departure and the angle of the boom. The load torque indicator is certified in the laboratory in accordance with world safety standards. For ease of use, the value of the current load torque is determined as a percentage to the maximum.
- If the permitted load torque is exceeded, the alarm is activated and further increase of the load torque is blocked.
- The information display in the cockpit operator’s cockpit displays: boom length, shows in which sector the boom is front, rear or side, current work platform load, work platform height compared to boom departure length, indicates maximum permissible tilt angle and boom length, current angle boom angle, permissible limit of boom working radius, maximum safe areas of work.