fbpx

+38 067 577 88 88

Hyundai HD78 refrigerated carrier

Add to compare

Description

Basic Chassis HYUNDAІ HD78
Weight of the van, kg 1800 (± 5%)
Wagon type Refrigerator
Temperature mode 0 +5
Internal dimensions of the van on the panels, mm:
Length 5000
Width 2200
Height 2200
Internal volume, m³ 24,20
Subframe (wagon frame framework) Made from longitudinal and transverse channels, alternating with transverse profile tubes, grounded and painted in black
Fastening the van to the frame of the chassis With console brackets and unloading elements. At the back – a rigid connection
Wagon design Frameless sandwich panel construction
Heater thickness:
– the front wall – not less than 80 mm;
– side walls – not less than 60 mm;
– roof panel – not less than 90 mm;
– doors – not less than 80 mm.
Filler sandwich panels Extruded polystyrene foam
Outer sheathing Fiberglass reinforced plastic, with extra roving reinforcement, manufactured by Optiplan GmbH, Germany
Interior lining Fiberglass reinforced plastic, with extra roving reinforcement, manufactured by Optiplan GmbH, Germany
Floor – Monolithic, multilayer construction, thermally insulated, thickness of not less than 90 mm, in the floor – waterproofing of plywood in thickness of 21 mm, thermo isolator – extruded polystyrene foam;
– Floor covering (inside the van) – flush, two-component, polymer floor with an anti-slip coating of yellow color.
Back door Twin-engined with clamps, multi-pile rubber seal to prevent moisture and dirt from entering the van.
Furniture – Locks of the type Ulises / LIR (with a key), 1 on the door leaf;
– Rods for door fittings made of stainless steel with a diameter of 27 mm;
– Stainless steel furniture;
– 3 hinges on 1 door leaf;
– Stainless steel accessories made by MRF, Spain;
Exterior body trim Anodized transport aluminum profile
Portal of the rear door Stainless Steel
Equipment – The front panel is adapted for the installation of refrigeration equipment;
– Front, rear and lateral dimensional LED markers (4 orange, 2 red, 2 white marking lights) on the wagon;
– LED illumination inside the van (4 bellows);
– Sliding ladder (galvanized) – 1 pc.
– Rubber roller back bits (2 pcs.).
– Accoustic locking of the rear doors;
– Aluminum profile (cutter) in height no less than 310 mm from the floor and at least 4 mm thick, along the entire perimeter of the van, including the doors;
– Aluminum angles on the joints of the panel inside the van;
– Protective strip on the front wall and doors of aluminum profile in the thickness of 4 mm, width 150 mm, at a height of 1100 mm from the floor;
– Protective strip around the perimeter of the van, including doors on the door of the aluminum profile in the thickness of 4 mm, width 150 mm, at a height of 500 mm from the floor;
– Protective strip on the front wall and side panels made of aluminum profile in the thickness of 4 mm, width 150 mm, at an altitude of 1350 mm from the floor;
– The strip of cargo fixing on the side panels at a height of 1100 mm from the floor;
– Plastic flaps, manufactured by Italy;
– Side protection (bucket): aluminum profile on folding brackets, manufactured by Italy;
– Laminating with a reflective tape on the corners
The color of the van White
Meat system 4 row tubular guides for EURO hooks (made of an aluminum pipe 60 mm in diameter with lock hooks) brackets are made of durable anodized aluminum, for carriage half-shaft.
Warranty 24 months subject to maintenance
Terms of payment 50% prepayment, 50% before shipment of the finished product
Documents To register a vans in the SC

Suspension cabin semi-rotating type

The cabin is on two oil pillows. This innovative design is one of the key elements for a soft, comfortable ride.

Sloping cabin

Maintenance and regular inspections are easier than ever thanks to a 50-speed tilting cabin that provides quick and easy access to the engine.

Air monitoring system

The cabin is on two oil pillows. This innovative design is one of the key elements for a soft, comfortable ride.

Full wheel drive system

2WD or 4WD is selected according to road conditions ‘2WD’ under normal road conditions ‘4WD’ when driving out of the road Equal distribution of torque between axles. ‘4WD’ is not recommended for use on high-quality roads

Options

  • Anti-lock Braking System (ABS)
  • Electric heated mirrors
  • Brake Distribution System (EBD)
  • Tinted strip of windshield
  • Autoregulation of brake pads
  • The compartment is 300 mm behind the driver’s seat
  • Front fog lights
  • Central lock
  • Rear fog lights
  • Electronic Tachometer
  • Steering column control
  • Anti-traumatic footrest
  • Fuel filter separator
  • Tape recorder

Additional information

Manufacturer

Type

Wheel formula

Wheel base, mm

Total weight, kg

Dimensions, mm (length / width / height)

Load on the front axle, kg

Load on the rear axle, kg

Own weight, kg

Freight, kg

Safety

,

Front wheel track, mm

Rear wheels track, mm

Suspension type, front

Suspension type, rear

Type of transmission

Number of gear transmissions

Clearance, mm

Engine

Ecological standard

Fuel type

Engine volume, сm³

Engine power, kW/hp

Maximum torque (n/m)

Fuel tank, l

Minimum radius of rotation, m

Maximum speed, km/h

Reviews

There are no reviews yet.

Be the first to review “Hyundai HD78 refrigerated carrier”

 

KONTACTS

Address:
st. Brovarskaya, 2a, 7th kilometer of Boryspil highway

 

Sales department:
+38 067 577 88 88

СТО:

+38 (063) 233-36-03

(In the FOZZY hypermarket)
with. Snowdrops
Kyiv region

+38 (044) 233-36-03

autoregion@ukr.net

+38 (044) 592-40-80

+38 (044) 331-21-35

ASK A QUESTION

12 + 3 =

By submitting a message, you agree to our privacy policy